Chemical and Water Definitions:
Acid Demand: A titration test used to determine proper amounts of acid needed to reach correct levels.
Balanced Water: Balanced water is the result when all of your chemical parameters are where they should be, and thus "balance" each other.
Base Demand: A titration test used to determine proper amounts of base (pH increaser) needed to reach correct levels.
BreakPoint Chlorination: When you shock your pool, the goal is to reach a high enough level of free chlorine, measured in ppm, to break apart molecular bonds, specifically the combined chlorine molecules. When breakpoint is reached with sufficient additions of chlorine everything in the pool is oxidized.
Chlorine: A gas that when added to water in any form acts as an oxidizer, sanitizer, disinfectant and all around biocidal agent.
Chlorine Demand: The quantity of free available chlorine removed during the process of sanitizing. The amount of organic and non-organic material contained in the water will "demand" a certain level of oxidizer to be destroyed.
Conditioner: Also called Cyanuric Acid (CYA) or stabilizer, this chemical provides a shield from the sun around the chlorine molecule.
Dirt Demand: The demand that your pool has for dirt. If you remove the dirt from the pool, you have created a dirt deficit, and the pool will actually suck dirt out of the air to maintain its dirt demand.
Ionizer: An ionizer is a device mounted on your return line, and through which water flowing will receive charged metal ions.
Non-Chlorine Shock: Used to oxidize materials such as microorganisms, contaminants or chloramines.
ppm: Parts per million.
Sanitizer: A chemical agent used to remove unwanted contaminants.
Scale: Usually whitish in color, it forms on pool surfaces and equipment when mineral salts are forced out of solution.
Shock: As a noun it loosely describes the products used in shocking, such as hypochlorites, potassium permonysulfate or hydrogen peroxide. As a verb it describes the act of bringing the sanitizer level up so high that breakpoint chlorination is reached.
Pool Structure and Equipment Definitions:
Automatic Pool Cleaner: A device which agitates or vacuum debris from the walls and floor of the pool.
Backfill: The repositioning of the soil after construction of a pool.
Backwash: The process of thoroughly cleaning the filter medium and/or elements by reversing the flow of water through the filter to waste.
Ball Valve: A device with a hollowed out ball inside which can be turned with an external handle to decrease or increase flow.
Blower: Plumbed into the spa return line, air is injected to produce fun bubbles and a hydrotherapy effect in the spa.
Booster Pump: Secondary to the filter pump, a booster pump is used to power an automatic pool cleaner, such as Polaris or Letro.
Conduit: A pipe, usually gray PVC or flexible PVC designed to carry wires from a source (i.e. time clock) to a load (i.e. pump motor).
Coping: The capstone on top of the bond beam which finishes the edge around a pool or spa. It may be precast concrete or brick. On vinyl liner pools pre-fab coping is usually part of an integrated system for the wall, vinyl liner and deck.
Automatic covers: Solid, reinforced vinyl which rolls onto a reel on one end of the pool and attaches on the sides into small aluminum tracks. Can be motorized or hand crank. Some models may snap the sides into small anchors placed into the deck, providing more shape flexibility. Provides safety (with water pumped off), debris protection and heat/chemical/water retention.
Hard Covers: A cover which rests on the edge or coping of the spa or small pool. Provides a barrier to debris and possibly people, while keeping the heat trapped in.
Mesh Covers: These stretch tightly across the pool like a trampoline. The only covers which can be called safety covers in that the mesh polypropylene allows precipitation to pass through.
Solar Covers: Sometimes called a thermal blanket, this cover floats on the surface, magnifying the sun's rays to warm the water and also provide chemical/heat/water evaporation. Solid Covers: These are usually made of some form of plastic or vinyl and are secured around the edges either by Aqua Bloks or similar weight or the edges attach to anchors set in the concrete or wood deck.
Winter Covers: A barrier to sun and debris, winter covers secure the pool from contamination. These are subdivided below.
Diverter Valve: Used in a twin-port skimmer, a diverter allows the operator to manipulate the amount of flow from the main drain and skimmer to the pump.
Effluent: The water that flows out of the pump, on its way through the filter, heating and treating equipment, and returning to the pool.
Filter: A device used to remove particles suspended in the water by pumping water through a porous substance or material.
Gas Valve: An electronic valve in the pool heater that directs gas flow from the meter to the pilot and the burner tray.
Gunite: A dry mixture of cement and sand mixed with water at the "gun"; hence the name. A gunite operator "shoots" the pool's rough shape, while finishers trowel after.
Heat Pump: The antithesis of the air conditioner, the heat pump's cooling coil removes heat from the air while the condenser coil transfers it to water cycling through it.
Jandy Valve: A brand name of a three way valve, which has simplified pool plumbing.
Jet Pump: Used in spas to provide additional thrust into the hydrotherapy jets.
Multiport Valve: A 4 or 6 position valve combining the functionality of several valves into one unit, revolutionizing pool plumbing. The five common functions are described below: